docker安装frp及其配置

安装frps服务端

docker run --restart=always --network host -d -v /yuxi/docker/frp/frps.toml:/etc/frp/frps.toml --name frps snowdreamtech/frps:latest

frps.toml

# This configuration file is for reference only. Please do not use this configuration directly to run the program as it may have various issues.

# A literal address or host name for IPv6 must be enclosed
# in square brackets, as in "[::1]:80", "[ipv6-host]:http" or "[ipv6-host%zone]:80"
# For single "bindAddr" field, no need square brackets, like `bindAddr = "::"`.
bindAddr = "0.0.0.0"
bindPort = 7000

# udp port used for kcp protocol, it can be same with 'bindPort'.
# if not set, kcp is disabled in frps.
kcpBindPort = 7000

# udp port used for quic protocol.
# if not set, quic is disabled in frps.
# quicBindPort = 7002

# Specify which address proxy will listen for, default value is same with bindAddr
# proxyBindAddr = "127.0.0.1"

# quic protocol options
# transport.quic.keepalivePeriod = 10
# transport.quic.maxIdleTimeout = 30
# transport.quic.maxIncomingStreams = 100000

# Heartbeat configure, it's not recommended to modify the default value
# The default value of heartbeatTimeout is 90. Set negative value to disable it.
# transport.heartbeatTimeout = 90

# Pool count in each proxy will keep no more than maxPoolCount.
transport.maxPoolCount = 20

# If tcp stream multiplexing is used, default is true
# transport.tcpMux = true

# Specify keep alive interval for tcp mux.
# only valid if tcpMux is true.
# transport.tcpMuxKeepaliveInterval = 60

# tcpKeepalive specifies the interval between keep-alive probes for an active network connection between frpc and frps.
# If negative, keep-alive probes are disabled.
# transport.tcpKeepalive = 7200

# transport.tls.force specifies whether to only accept TLS-encrypted connections. By default, the value is false.
transport.tls.force = false

# transport.tls.certFile = "server.crt"
# transport.tls.keyFile = "server.key"
# transport.tls.trustedCaFile = "ca.crt"

# If you want to support virtual host, you must set the http port for listening (optional)
# Note: http port and https port can be same with bindPort
vhostHTTPPort = 7080
vhostHTTPSPort = 7443

# Response header timeout(seconds) for vhost http server, default is 60s
# vhostHTTPTimeout = 60

# tcpmuxHTTPConnectPort specifies the port that the server listens for TCP
# HTTP CONNECT requests. If the value is 0, the server will not multiplex TCP
# requests on one single port. If it's not - it will listen on this value for
# HTTP CONNECT requests. By default, this value is 0.
# tcpmuxHTTPConnectPort = 1337

# If tcpmuxPassthrough is true, frps won't do any update on traffic.
# tcpmuxPassthrough = false

# Configure the web server to enable the dashboard for frps.
# dashboard is available only if webServer.port is set.
webServer.addr = "0.0.0.0"
webServer.port = 7500
webServer.user = "1737101321"
webServer.password = "CHENYUXI03"
# webServer.tls.certFile = "server.crt"
# webServer.tls.keyFile = "server.key"
# dashboard assets directory(only for debug mode)
# webServer.assetsDir = "./static"

# Enable golang pprof handlers in dashboard listener.
# Dashboard port must be set first
webServer.pprofEnable = false

# enablePrometheus will export prometheus metrics on webServer in /metrics api.
enablePrometheus = true

# console or real logFile path like ./frps.log
log.to = "./frps.log"
# trace, debug, info, warn, error
log.level = "info"
log.maxDays = 3
# disable log colors when log.to is console, default is false
log.disablePrintColor = false

# DetailedErrorsToClient defines whether to send the specific error (with debug info) to frpc. By default, this value is true.
detailedErrorsToClient = true

# auth.method specifies what authentication method to use authenticate frpc with frps.
# If "token" is specified - token will be read into login message.
# If "oidc" is specified - OIDC (Open ID Connect) token will be issued using OIDC settings. By default, this value is "token".
auth.method = "token"

# auth.additionalScopes specifies additional scopes to include authentication information.
# Optional values are HeartBeats, NewWorkConns.
# auth.additionalScopes = ["HeartBeats", "NewWorkConns"]

# auth token
auth.token = "12345678"

# oidc issuer specifies the issuer to verify OIDC tokens with.
auth.oidc.issuer = ""
# oidc audience specifies the audience OIDC tokens should contain when validated.
auth.oidc.audience = ""
# oidc skipExpiryCheck specifies whether to skip checking if the OIDC token is expired.
auth.oidc.skipExpiryCheck = false
# oidc skipIssuerCheck specifies whether to skip checking if the OIDC token's issuer claim matches the issuer specified in OidcIssuer.
auth.oidc.skipIssuerCheck = false

# userConnTimeout specifies the maximum time to wait for a work connection.
# userConnTimeout = 10

# Only allow frpc to bind ports you list. By default, there won't be any limit.
allowPorts = [
  { start = 2000, end = 3000 },
  { single = 3001 },
  { single = 3003 },
  { start = 4000, end = 50000 }
]

# Max ports can be used for each client, default value is 0 means no limit
maxPortsPerClient = 0

# If subDomainHost is not empty, you can set subdomain when type is http or https in frpc's configure file
# When subdomain is test, the host used by routing is test.frps.com
#subDomainHost = "frps.com"

# custom 404 page for HTTP requests
# custom404Page = "/path/to/404.html"

# specify udp packet size, unit is byte. If not set, the default value is 1500.
# This parameter should be same between client and server.
# It affects the udp and sudp proxy.
udpPacketSize = 1500

# Retention time for NAT hole punching strategy data.
natholeAnalysisDataReserveHours = 168

# ssh tunnel gateway
# If you want to enable this feature, the bindPort parameter is required, while others are optional.
# By default, this feature is disabled. It will be enabled if bindPort is greater than 0.
# sshTunnelGateway.bindPort = 2200
# sshTunnelGateway.privateKeyFile = "/home/frp-user/.ssh/id_rsa"
# sshTunnelGateway.autoGenPrivateKeyPath = ""
# sshTunnelGateway.authorizedKeysFile = "/home/frp-user/.ssh/authorized_keys"

#[[httpPlugins]]
#name = "user-manager"
#addr = "127.0.0.1:9000"
#path = "/handler"
#ops = ["Login"]

#[[httpPlugins]]
#name = "port-manager"
#addr = "127.0.0.1:9001"
#path = "/handler"
#ops = ["NewProxy"]

安装fprc客户端

docker run --restart=always --network host -d -v /root/yuxi/frp/frpc.toml:/etc/frp/frpc.toml --name frpc snowdreamtech/frpc

frpc.toml

serverAddr = "47.76.51.193"
serverPort = 7000
auth.token = "12345678"


#j4125
[[proxies]]
name = "j4125-pve"
type = "tcp"
localIP = "127.0.0.1"
localPort = 8006
remotePort = 16051

[[proxies]]
name = "j4125-SSH"
type = "tcp"
localIP = "127.0.0.1"
localPort = 22
remotePort = 20086

[[proxies]]
name = "j4125-portainer-agent"
type = "tcp"
localIP = "127.0.0.1"
localPort = 9001
remotePort = 20085

#ceontos虚拟机
[[proxies]]
name = "centos-SSH"
type = "tcp"
localIP = "192.168.1.113"
localPort = 22
remotePort = 20083

[[proxies]]
name = "centos-portainer-agent"
type = "tcp"
localIP = "192.168.1.113"
localPort = 9001
remotePort = 20084

[[proxies]]
name = "centos-qiandao"
type = "tcp"
localIP = "192.168.1.113"
localPort = 8923
remotePort = 16053

[[proxies]]
name = "centos-ql"
type = "tcp"
localIP = "192.168.1.113"
localPort = 5700
remotePort = 16052

[[proxies]]
name = "centos-bt"
type = "tcp"
localIP = "192.168.1.113"
localPort = 10000
remotePort = 16054

#5700u
[[proxies]]
name = "5700u-pve"
type = "tcp"
localIP = "192.168.1.3"
localPort = 8006
remotePort = 16050

[[proxies]]
name = "5700u-SSH"
type = "tcp"
localIP = "192.168.1.3"
localPort = 22
remotePort = 16050

[[proxies]]
name = "5700u-portainer-agent"
type = "tcp"
localIP = "192.168.1.3"
localPort = 9001
remotePort = 20082

可能遇到的问题

1.start error: port unavailable
方法:关闭服务端占用的端口